What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 25.06.2025 13:56
In schematic diagrams this is the symbol for a fuse:
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
What is lightning?
Jordan Ott hiring strengthens questions on Suns’ decision-making tree - Arizona Sports
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
The other is “what does a “fuse” do?”
2024–10–16 [ OO OLAOYE OYEBODE ]
Why was Meghan Markle's Emmy nomination revoked, and how will it impact her Hollywood career?
I post the exact comment here.
what exactly is a ‘surge’ protector?
Now when you have a certain ac resistance, then a current flows in a loop.
One
At one ohm, the resistor has a maximum of 1 watt power.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
Trump’s budget puts Huntsville-made spacecraft on the chopping block - AL.com
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
so, what happens?
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
We've Been Misreading a Major Law of Physics For Nearly 300 Years - ScienceAlert
He then describes the function of a fuse.
eight
This one hit behind the barn.
Meta buys a nuclear power plant (more or less) - TechCrunch
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
Because the load is inductive, the current lags the voltage.(by a bit).
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
A fuse is a non-resetable over current circuit protector.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
Tuesday Telescope: Lighting, sprites, and airglow over Central America - Ars Technica
So, the voltage could go up to 500 volts, and the fuse will not open up.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
Nemo cumque quis qui velit unde nihil.
At least they know the answer if they wanted it.
(Dc diagram shown, AC is similar).
This is the picture of an electronic coil of wire wound around a core of magnetic material.
Upvotes:
He then asserts :
He then describes Rainy Season and Lightning.
Rem dolor autem consequatur assumenda magnam.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
a photo is worth a thousand words.
The bolt then partially travels down the line to your home.
For this case there are devices called Metal oxide varistors (MOV).
The third is lightning and “how it gets conducted into a home.”
The MOV will conduct when the voltage exceeds 50% of line voltage.
Here is a simplified AC power diagram.
There are two important concepts here.
Apple’s new iPadOS has given my iPad a new lease of life - Creative Bloq
A circuit breaker is similar, but is resettable.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
This is where the MOV conducts again, and dissipated the energy.
This is where this question deviates from being a 'generic' question, and becomes more specific.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
but I think this circuit , shows a few more pieces.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
What does a fuse do?
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
An AC voltage/ current source, and an ac inductive load.
the problem then depends on "how fast does the fuse operate?".
Barnstars:
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
[old diagram got deleted by accident]
First Sentence:
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
but this device (an Inductor) … impedes the rapid changes in the current.
nine
Edit 2024–10.
But it can get overloaded, and no longer works.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
This device then solves the entire problem.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
There are three different concepts here that are getting confused.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
It also is a device that limits the change in current flow.
One is “what exactly is in a ‘surge protector’ ? ”
This is 'the assistant's answer'
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
These devices are installed between the “hot” and “neutral” and protective ground.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
But… the neutral is now “floating” because of the 1 ohm resistance.
[image of Common-mode choke]
These are simplified answers to the original question, and does not change anything I wrote above.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
2024–10–14 [Omar Gharbi Omar Gharbi ]
2024–10–10[John johnson John Johnson ]
It seems Mohan does not understand the difference between a comment and an Answer.